Carrying out tests on the vehicle is dependent around the year of manufacture. Automobiles after 1996 operate underneath the second generation of On-Board Diagnostic coding. Also, in case your vehicle or light truck is done after 2008, it'll have in all probability a tire pressure monitoring system. You will find other self-monitoring systems within the brakes as well as in airbags. Many of these systems could be utilized having a scanner with the diagnostic outlet usually around the driver's side from the vehicle. In case your vehicle predates 1996, diagnostic methods vary by brand name. You'll have to talk to your manual and assets specific for your vehicle.
1. Visit an automotive store and look for a code SKS-3068 Auto Test Wire. The greater you have to pay, the greater features the scanner may have. Some greater finish diagnostic tools are multilingual or can identify several system. Cheaper Locksmith Tools are devoted simply to obd2 codes. Also, the scanner you're considering to purchase will even rely on which trouble indicator light is participating in your automobile. You'll have a regular "Check Engine" light, in addition to a separate light for brakes, airbags, and tires. In case your airbag light is active, you need to drive your vehicle to some auto technician diagnostic tools aren't as broadly available, and also the needed repairs tend to be more complex.
2. Hook the diagnostic scanner to the pc outlet around the driver's side from the vehicle. For many cars, this outlet is underneath the dash, approximately the gas pedal around the right and also the hood release around the left. It's frequently dark colored, and can feature 16 pin receptors. The plug in the finish from the scanner's cable should conveniently fit, so not jam it in.
3. Turn the SKS 3055B Auto on. You'll have to do that for many auto diagnostic tools, although not for other people. Some scanning devices will turn on their own when a link to an automobile's diagnostic product is thought. The procedure might differ slightly by logo and diagnostic system, but the operation is essentially exactly the same
4. Place your key in to the vehicle's ignition and switch towards the "On" or "Run" position. This can vary based on vehicle type, so talk to your manual.
5. Wait a couple of seconds as the diagnostic system JBT-VGP and also the scanner begin a connection. You will be aware the 2 systems are linked when a trouble code seems in your scanner.
6. Reference the problem code using the scanner's owner manual. The manual may have a listing of codes and definitions. If you work with an OBD-II scanner, these codes is going to be generic ones authorized by the Society of Automotive Engineers. Manufacturer specific codes will not maintain either the scanner or even the vehicle's manual. Write the code lower if this sounds like the situation, and appear up online. You will find some dedicated to ODB code reader trouble codes as well as their definitions.
