Coming after alldata 10.52 repair manual, Alldata torrent 10.53 hot selling for a long time. Alldata repair Manual professional workshop service and repair manual, maintenance, wiring diagram, diagnostic. Do you know how to install Alldata torrent 10.53 software. Below Autonumen.com sharing Alldata torrent 10.53 Alldata repair Manual 2015 All data 10.53 Installation Guide.
Alldata repair Manual Installation tips
– Place all ISO-image files in one folder on your hard drive (eg.: ALLDATA Software);
– Before you install, carefully examine the installation instructions(included in Mobile HDD)! Turn off the internet! Use a firewall to block any attempt to access!
1. Burn or mount the Image from archive AllData.10.53.1000.101_Install_Disk_2013.08 with your favorite Tool.
2. Start Setup and install. (The message “Missing key” – just ignore, and choose “Yes”)
3. After installation is complete, copy the files from Crack-folder in a folder with a installed program’s.
4. Use a firewall to block any attempt to access the internet!
5. Just open alldata 10.53 program.
Recent Posts
ALLDATA 10.53 (Q3 2013) is the final edition of this DVD containing the most complete database with original information from car manufacturers. With AllData we can have instant access to a single source for diagnostics, repair and maintenance.
We can consult with complete security the correct data to repair a specific vehicle as indicated by the manufacturer. As this database, it covers more than 33,000 specific engine vehicles. It includes the repair of procedures, diagrams and the specific PSOs for each vehicle.
1. Piwis Tester 3 full system from Autonumen.com come with Piwis tester 3 Hardware, V37.250.020 Piwis 3 software, Panasonic CF-54 laptop all configuration, activated & test well before shipment, client get full system plug & play ready to work,
2. Piwis 3 for Porsche Piwis Tester 3 cover old & new Porsche diagnostic & programming from 1998-2018
3. V37.250.020 Piwis 3 software from Autonumen.com with unlimited Piwis 3 software license
4. Piwis Tester 3 full system comes with Porsche PET 7.3 Porsche electronic parts catalog & developer mode software.
5. Piwis 3 Porsche PST3 VCI from Autonumen.com have license automatic update, online view of the technical documents, fault finding guide, online programming, faster and more efficient work
Piwis 3 is Piwis Tester 2 Update Version for Porsche Diagnostic & Programming, Piwis 3 Come with Piwis 3 software V37.250.020 work for Porsche new car models After 2017 which Piwis tester 2 cannot support. Any need for Piwis 3 Porsche PST3 VCI just contacts us freely.
Piwis tester 2 a professional diagnositc tool for Porsche vehicles before 2017. We received feedback from customers that porsche piwis tester 2 software prompted error message”tester is not imprinted” can not go on to do diganosis, or page suck at “loading ODX Data” page, see below images
6.Piwis Tester 2 Not Imprinted Solution-1
6.Piwis Tester 2 Not Imprinted Solution-2
Piwis Tester 2 Is Not Imprinted Solution?
Solution: Software need te be activated, contact software sell to activate the software.
Piwis Tester II Software Stuck At “Loading ODX Data”
Soultion: Change date of laptop to year 2010
6.Piwis Tester 2 Not Imprinted Solution-3
if you met below issue during using Porsche Piwis 3 , use the same method, chang the date of laptop to 2010.
Issue: device conneceted to vehicle, but software can not see the device
Solution: Change date of laptop to year 2010
6.Piwis Tester 2 Not Imprinted Solution-4
If you want to find a professional auto repair workshop sevice and repair manual including full best information for vehicles from 1982-2014 TSBs, maintenance schedules, manufacturer recall information, OE solutiona and factory images and diagrams, 2014 ALLDATA 10.53 And 2015 Mitchell OnDemand 2 IN 1 is your best choise. Welcome to purchase it from Autonumen.com with only 105USD.There is detailed installation video for alldata and Mitchell OnDemand in the hard disk, if you still meet technique problem, we can help you by teamviewer to solve any problem. Here is the detailed installation instruction for alldata:
First, if your computer has anti-virus software, please close it.
If your pc is with network, please disable the network or unplug the network cable.
open the hard disk, double click alldata file-AllData.10.53.1000.101_Install_Disk_2013.08
Choose “Set up” to install the software-accept-next-finish set up.
During set up, you need to add companoy information, just write 1.1.1., no need exact information and finish set up.
There is no new crack for 10.53, so we use 10.52 crack. The function is the same as 10.52, no any difference. It can do new cars and the car list till 2014. So just open the file “alldata.10.52_Crack.only”, copy the file “ace and go back to the desktop. right click and select properties-open file location-paste ace file-select “copy and replace”-finish the installation.
Open the alldata on the desktop and now add database to the alldata. Choose data”-device-connect. Here is one very important step you need to take care: each pc has different drives, so you need to choose the right drive. For example, if you put the alldata on H:, you need to choose H:, if you put the hdd on G:, you need to choose G:. Let’s take H: Drive as example. We need to add database.add dm and imp.dm1 is “H:alldata 10.53DM01Q313”. Copy and Paste and choose “enable data cashing”. If you want to check all the vehicle information, you need to add all the database one by one. DM has 01-16,imp has 01-70, you must add one by one from 01 to last. It will take long time and please keep your patience. After you add all click OK and then you can free to use the software now.
It has only some 214 vehicle not all.
Question: when I register Launch X431 pro mini, it displays “Please input the displayed image verification code”, I haven’t receive the verification in my email inbox, where to find it?
X431 chief engineer replied:
The machine is able to receive the verification code in the “Feedback”, please check the tablet date and time as well as the internet connection, if all are okay, please register again after 30 minutes later.
Please look at the APP Feedback menu:
PS: The X431 Pro Mini machine plays as the same role as a phone, which can receive the message.
ICOM NEXT A +B+C is the latest generation for BMW diagnostic tool perfect replacement of BMW ICOMA/A2/A3/P, supports all BMW E/ F/ G Series Cars till 2020. ICOM NEXT supports programming and coding offline directly, no need online account.
3. Support car models: For All BMW E/ F/ G Series Cars (BMW, MINI, Rolls-Royce BMW-Model, BMW Motorcycle and electric car ).
4. Support Multi-Languages: American English, British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.
5. Windows System Requirements: Win7 System, 64bit, I5CPU 4G RAM or above.
6. Function: ① for BMW Diagnosis, ② Programming and Coding , ③ Brush hidden, ④ Single Engineer and E-sys, ⑤ WinKFP, ⑥ ItoolRadar, ⑦ Tool32, ⑧ INPA, KSD2 , Grop ISPI, NCS- EXPERT tool, ⑨ ISTA, ⑩ New features activation and the module system update.
7. Guarantee: One Year Warranty All Tested Before Delivery Tech Support for Free
How To Set WIFI For ICOM NEXT A?
1.connect device and laptop, open device manager , see below
Correct IP address: 169.254.92.38(if not this IP, pls restart device)
Note: don’t cut off the electricity supply during wifi setting
2. Open website: http://169.254.92.38:58000/ , you will see below page
first, Click”Device information”, no need setting here
second, Click “Device Confriguration”
Change device name to ISPI-NXT and mode to ISPI-Next, save changes.
Third, click “LAN Settings”, change disconver mode to “DHCP” and save changes.
Fourth, click “WLAN Settings”, change country to CHINA—CN
SSID need to input your wifi ID and Pre—sharde Key need to input your wifi password, save changes.
ICOM-NEXT-A-WIFI-Setting-Instruction-7
Fifth, Chick “Self-Test”, and then click “start self-test”
After self-test done, will show last sefl-test result, means that icom next A wifi setting is successful.