New WIFI VAS6154 ODIS 4.3.3 VAG Diagnostic Tool for VW Audi Skoda Free Shipping
Top 8 reasons to get VAS6154:
1.Latest diagnostic & programming interface work on VAG ODIS-S and ODIS-E,can replace the VAS 5054A and VAS 5055.
2.Available for Off-board Diagnostic Information Engineering from V6.2 onward and Off-board Diagnostic Information Service from V3.0.3 onward.
3. Support all VW Audi Skoda vehicles from 2000 onward including NEW & FUTURE MODLES under production.
4.Support WIFI & USB Connection:With wireless communication technology, can achieve wireless communication of the vehicle and diagnostic interface.
The following countries can use both WIFI & USB Connection:
Australia,Bosnia,Herzegovina,Brazil,Canada,Switzerland,Cyprus,Czech,Danmark,Estonia,Finland,Greece,Hongkong,Israel,India,Ireland,Italy,Lativia,Mexico,Netherland,New Zealand,Poland,Russia,Argentina,Korea,Singapore,Slovenia,Turkish,Ukraine,UAE,United States,United Kindom.
Also support USB module transmission, to ensure the reliability of diagnostic interface data transmission.if your country is not on the above authoriazted Country, you just can use USB Connection Module.
5. Support Multi-language: English, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech, Russian, Greek, Chinese
6.Update by CD: Latest Version is V4.3.3. Note: Do not support Old V19 Software.
7. If you want to do Seat, Bentley and Lamborghini, please buy VAS 5054A with Old V19 Software.
8. One year warranty
Note: when install the software, please choose 5054A.
VAS6154 ODIS V4.3.3 Computer Windows System Requirements:
Windows System Language: American English
Win 7 Professional version
System C:// have to be NTFS format
C:// need to have at least 40GB space for installing VAS 5054A
VAS6154 Infrastructure mode:
In infrastructure mode, several network-capable devices can be connected together (network subscribers).
For a wireless network, a WLAN access point is required. This access point forms the connection to WLAN-ready subscribers.
VAS6154 Point-to-point connection:
With point-to-point connection via a wireless network, VAS 6154 creates a radio network. VAS 6154 thereby adopts the role of a radio access point (Access Point). A direct connection is made between the diagnosis unit and the diagnosis interface VAS 6154.
VAS 6154 is configured using the web-based user interface.
VAS6154 ODIS 4.13 Software New Functions:
– Estimated remaining times are shown for ECU flash operations.
– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view,used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests
– The measured value display has been improved.
– Documents in GFF are displayed in separate windows.
– One message box will be shown at the beginning of the test drive mode.
– GFF hotfixes can be integrated during diagnostic sessions.
– Danger messages have been revised.
– Stopping of diagnostic sessions may be interrupted.
– Automatic deletion of autosave diagnostic protocols after successful transmission.
– Selection of PassThru diagnostic hardware has been improved.
GM MDI2 shares the same functions and vehicle coverage as GM MDI. GM MDI 2 features in a light blue color shell and brand-new shape, GM MDI features in dark blue shell.
2020 GM MDI2 is optional with Wifi version and USB version (means wired network connection is not allowed)
GM MDI is only optional with Wifi version.
Image 1: 2019 GM MDI2 in light blue (WIFI or USB options)
17.GM MDI2 vs GM MDI diagnostic programming tool-1
Image 2: GM MDI in dark blue.
17.GM MDI2 vs GM MDI diagnostic programming tool-2
Similarities:
1. Both GM MDI2 and MDI are compatible with GDS2 Tech2Win
17.GM MDI2 vs GM MDI diagnostic programming tool-3
Software version: 2019.3
OS: WIN7 64bit
Computer: the year after 2008, 4GB RAM
Pros: gds2 software needs no activation
The method to use: Insert the HDD with GM MDI gds2 software into your computer; the software can be used directly with the GM MDI scanner.
17.GM MDI2 vs GM MDI diagnostic programming tool-4 17.GM MDI2 vs GM MDI diagnostic programming tool-5
Tech2win is the program that works just like a Tech II, but the program running on a laptop for the MDI (clone MDI device which the Nano is).
GDS2 is the program for the C7, like the tech II and tech2win with midi is for the C6 instead.
On the VM GDS 2, you don’t need an account with GM to use it, short of needing to do SPS programming, which you will need a TDS SPS subscription instead ($40 for 2 years per car).
So the low down for most laptops,
Wants to be running in win 10 for TDS SPS programming.
Needs to be running a multi-core chip in win 7 or above to run VM player for VM GDS2.
Need to be running in Win 7 native (32 or 64 bit) to run Tech2win (will not work in a VM shell).
2. Both GM MDI2 and MDI have the same capabilities
Full dealer level diagnostics and programming for all Vauxhall /Opel 16 pin vehicles from 1996 to 2017.
1). Clone GM MDI Review
Compatibility:
Device works with GDS2 (Opel)
Device works with Tech2Win (Opel, Hammer)
The device does not work with SAAB via Tech2Win
GM MDI is working in Consult 3 plus
17.GM MDI2 vs GM MDI diagnostic programming tool-6
Cars tested- success & failure list:
1: SAAB 9-5, 2003, 3.0 TID- works
mine is a clone from China.
MDI Software 8.1.135.13
GT32
SAAB NAO V9.250
Simply pressed OK when Candy detected and all worked.
Tested on SAAB 9-5, 2003, 3.0 TID
2: 2014 model – works
SAAB NAO V9.250 is from 2014. Already tested.
The 2003 year too old – not interesting for me.
3: Saab 9-5, 2003, 3.0 – works
Tested by my own, works with Saab 9-5, 2003, 3.0
Online or offline issues:
1: online – good, offline – bad
GM MDI good, interface works online.
update mdi 100%.
offline too bad for new cars.
2: wifi card compatible
at now, Chinese clone GM MDI with the squ wifi card
3: wifi not working but works well with USB
I bought a cheap one and it only worked with USB. The wired network and wifi did not work. In fact, the card flash socket was missing from the board. Build quality was not to bad. I just use it to flash newer PCM/ecm’s.
Quoted: a man of his words to trust in:
I would not go by pictures posted on the web as vendors share the same photos but the MDI had a different ethernet connector and missing card flash socket. It was advertised as (without wifi). It does work fine on USB and for flashing PCM/ECM because at 480 Mbit/s it is almost 5 times faster than ethernet.
The MDI clone works fine with tech2win and also TIS2000. Used it for diags and PCM flashing with no problem (through USB port only)
2). GM TECH2 TIS2000 VS VXDIAG Nano VS MDI in the installation
ON the VX nano, sometimes you can get Tech2win to run on win 10 (maybe if you have an AMD chip or not, but have not figured that one out yet), while on my i7 machine, Tech 2 win will not run in win 10 instead.
Tech2win is the program that works just like a Tech II, but the program running on a laptop for the MDI (clone MDI device which the Nano is).
GDS2 is the program for the C7, like the tech II and tech2win with midi is for the C6 instead.
On the VM GDS 2, you don’t need an account with GM to use it, short of needing to do SPS programming, which you will need a TDS SPS subscription instead ($40 for 2 years per car).
So the low down for most laptops,
Wants to be running in win 10 for TDS SPS programming.
Needs to be running a multi-core chip in win 7 or above to run VM player for VM GDS2.
Need to be running in Win 7 native (32 or 64 bit) to run Tech2win (will not work in a VM shell).
Tis2000 needs to run in WinXP or built the VM XP shell, so it can be native in XP or in a VM shell so long as you have a multicore processor.
So the way I do it, since Tech2win will not run native on my machine with an I7 process in win 10, I have a dual boot up in win 7 and win 10 both.
Win 10 is used to run pretty much everything I run, short of Tech2 win, which I use the win 7 64 boot up to run it.
So in the Win 7 dual boot up (small 40 gig partition off the drive), have tech2win to use the Nano as a Tech II, plus VM GMSI, and Tis2000 in a VM shell since I may need them as well for the VX nano running as a tech II when running in win 7.
In win 10 boot up,
VM GDS2 V17
TDS using internet explorer native with account
VM Tis2000 built on a full XP OS with account
VM GMSI
If you want to just run a single OS system, instead of a dual boot up machine since you can’t get Tech2 win to run in win10, then you can run pretty much run everything in win 7 (32 or 64 bit), so long as you have a CPU that has multicores. Hence you going to need to run at least VM player for the VM shells, and it takes as a multi-core processor to run VM player (or VM workstation).
Note, I have VM workstation, instead of just VM player, since I build other VM shells to run in windows as well.
So again, it really just depends on your machine, and if you Tech2win will run correctly on it or not.
Hence the problem is when you open Tech2win, you need to get three pop up screens once Tech2win start the program.
The first screen will ask you what country, and you select North America.
17.GM MDI2 vs GM MDI diagnostic programming tool-7
The second pop up will ask you if the device is an MDI 1 or MDI 2, and you select GM Scanner MDI 1.
17.GM MDI2 vs GM MDI diagnostic programming tool-8
The third pop up screen will ask you if you want to select the USB device (the nano plugged into a USB port), you select it, then it will take you to the Tech2win start screen.
17.GM MDI2 vs GM MDI diagnostic programming tool-9
So if you open Tech2win, and you don’t get the three pop up screens but just goes directly to tech2win main start screen below instead, then Tech2win is not going to work on your machines win 10. Hence the problem is a glitch in midi and tech2 win interface to select the nano, to begin with (what the pop-up screens are), and if you can’t select the nano via the pop-up screens, tech2win will not connect to the nano in the first place.
17.GM MDI2 vs GM MDI diagnostic programming tool-10
Again don’t know if this is an AMD verse Intel CPU problem in win 10, but the only laptops that I have seen run Tech2win in windows 10, just happened to be laptops running an AMD CPU instead. And yes, have tried to skin the cat many way with added drivers and compatibility modes, and it’s driver/code line that Win 10 does not have for the Intel CPU (but seems to to have for the AMD CPU that is a carry over from the win 7 days to make the AMD chip work with win 10 instead).
Volvo 88890300 truck diagnostic tool is the latest OEM diagnostic tool made by Vocom and designed for maintenance of Volvo trucks, buses and other heavy vehicles that covers the whole repair process through the use of plug-ins..
If you don’t know how to install the volvo 88890300 Vocom Interface software, we can help you do it, you only need to buy it with laptop. it is convince and save time . the Software version is PTT1.12/2.40 , this software must installed on Windows XP system computer. Support Multi-languages.
Installation:
OS （system）: XP
Mainly 2 steps to install:
Install the software contained in the CD; it will take 1-2 hours
Connect the network connection to download from the server to install, it will take 2-3 hours.
What Companies and electrical systems Volvo 88890300 Vocom works with?
Volvo Trucks (Older electrical system, Vehicle electronics ’98, V2, V3, V4);
Volvo Buses (Conventional, Multiplexed, Multiplexed v2, Multiplexed v3);
Volvo Construction Equipment;
Volvo Penta (VERSION2);
We consider ourselves the authority on the Nexiq USB Link 2, and this guide proves it. Created by us, we are now including it with the USB Link 2’s for a fraction of the price. This guide is a 30+ page power-packed PDF that will give you information such as:
Step-by-step instruction with clear, concise pictures on how to set the proper adapter for each diesel program. This includes 19 different programs such as Cummins Insite, CAT ET, Premium Tech Tool, Eaton Service Ranger, Detroit Diesel Diagnostic Link, and many, many more!
The most common problem people have with a Nexiq USB Link 2 is that it won’t connect to the truck. But how do you figure out if its the adapter, the truck, the computer, or the cable? Well, we have created a simple 6-step process to help you figure it out! This guide gives pictures for every single step! We also include a custom flow-chart that you can print out and keep with your USB Link!
Clean up that pesky adapter list! Yes, you don’t need to have 20+ different adapters listed & installed on your laptop if you only have 1. We show you how to delete and clean them out!
We provide a complete list of accessories, with direct link to purchase, for all types of accessories for your USB Link. This includes extra cables, replacement cables, and protective gear to keep your USB Link running smooth!
PC-to-vehicle interface compatible with multiple software applications, minimizing your investment in multiple brand-specific diagnostic interfaces.
Class 1 Bluetooth provides up to 100 feet of wireless freedom
Flexible configuration supports wired or wireless connectivity
Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more
Reduce reprogramming times with direct USB connection
Mixed fleet capabilities with broad protocol support
Quick access to vehicle data for maintenance or management reports
Quickly attaches to vehicle’s diagnostic connector
No messy cables to untangle or get in the way with Bluetooth
Easy portability increases flexibility
May be used with desktop PC or laptop
FEATURES:
RP1210A, RP1210B, RP1210C and J2534 API support
Bluetooth vehicle-to-PC wireless connectivity
USB vehicle-to-PC connectivity
Protocol coverage for automotive to heavy duty vehicles:
3 CAN – J1939/CAN125/CAN250/CAN500/CAN1000
Automatic bit rate detection for all standard CAN channels
Single Wire CAN
Fault Tolerant CAN
J1587/J1708
J1850
ISO 15765 (Diagnostic CAN)
ISO 14230 (KWP2000 over ISO9141)
J2534
ALDL
ATEC 160 (160 baud)
Supports Windows® XP, Windows® 7 32- and 64-bit versions, and Windows® 8 32- and 64-bit versions
Have VCM2 clone and when I install the patch file, I get message ” error license for function: Passthru” and “Device error”. I install Ford IDS V112, Mazda IDS V107.
Customer problem: I have received the VAS6154 device. I install ODIS 5.1.6 on Win7/ 64 bit, but I have a problem connecting to the vehicle (all 3 devices work identically). The first time I connect to a vehicle, it recognizes the vas6154 interface. If I disconnect and reconnect the interface then the interface is no longer visible in ODIS. This appears on USB or WIFI and appears every time. After that I have to shut down ODIS and restart. I’m asking for help!!!vas6154 original vas 6154a
12.How to Solve VAS6154 Interface Cannot Appear on ODIS 5.1.6 Software-112.How to Solve VAS6154 Interface Cannot Appear on ODIS 5.1.6 Software-2
Autonumen.com engineer solution:
The VCX Manager and ODIS 5.1.6 software cannot be opened at the same time. If you restart the ODIS software and can connect well, it indicates that it can use normally.
